Enhancing Drug Delivery Efficacy Through Bilayer Coating of Zirconium-Based Metal-Organic Frameworks: Sustained Release and Improved Chemical Stability and Cellular Uptake for Cancer Therapy.

The development of nanoparticle (NP)-based drug carriers has presented an exciting opportunity to address challenges in oncology. Among the 100,000 available possibilities, zirconium-based metal-organic frameworks (MOFs) have emerged as promising candidates in biomedical applications. Zr-MOFs can be easily synthesized as small-size NPs compatible with intravenous injection, whereas the ease of decorating their external surfaces with functional groups allows for targeted treatment. Despite these benefits, Zr-MOFs suffer degradation and aggregation in real, in vivo conditions, whereas the loaded drugs will suffer the burst effect-i.e., the fast release of drugs in less than 48 h. To tackle these issues, we developed a simple but effective bilayer coating strategy in a generic, two-step process. In this work, bilayer-coated MOF NU-901 remained well dispersed in biologically relevant fluids such as buffers and cell growth media. Additionally, the coating enhances the long-term stability of drug-loaded MOFs in water by simultaneously preventing sustained leakage of the drug and aggregation of the MOF particles. We evaluated our materials for the encapsulation and transport of pemetrexed, the standard-of-care chemotherapy in mesothelioma. The bilayer coating allowed for a slowed release of pemetrexed over 7 days, superior to the typical 48 h release found in bare MOFs. This slow release and the related performance were studied in vitro using both A549 lung cancer and 3T mesothelioma cells. Using high-resolution microscopy, we found the successful uptake of bilayer-coated MOFs by the cells with an accumulation in the lysosomes. The pemetrex-loaded NU-901 was indeed cytotoxic to 3T and A549 cancer cells. Finally, we demonstrated the general approach by extending the coating strategy using two additional lipids and four surfactants. This research highlights how a simple yet effective bilayer coating provides new insights into the design of promising MOF-based drug delivery systems.

Manipulating morphology and composition in colloidal heterometallic nanopods and nanodendrites.

Branched Pt nanoparticles represent an exciting class of nanomaterials with high surface areas suitable for applications in electrocatalysis. Introducing a second metal can enhance performance and reduce cost. External factors such as capping agents and temperature have been used to offer insights into nanopod formation and to encourage their kinetic evolution. More recently, nanodendrites have been reported, though synthesis has generally been empirical; making controlled variation of morphology while maintaining bimetallic composition an elusive target. We report the combination of Pt with Fe under a range of conditions, yielding individually bimetallic nanoparticles whose construction sheds new light on nanopod and/or nanodendrite formation. Fine control of metal precursor reduction through modulating capping agents, reagents, and temperature initially directs nanopod synthesis. Morphology control is retained while composition is then varied from Pt-rich to Pt-poor. Additionally, conditions are identified that promote the collision-based branching of nanopod arms. This allows synthesis to be redirected for the selective growth of compositionally controlled nanodendrites in predictable fashion.

Visible light photocatalysts from low-grade iron ore: the environmentally benign production of magnetite/carbon (Fe3O4/C) nanocomposites.

Magnetite (Fe3O4) nanoparticles coated with dextrose and gluconic acid possessing both super-paramagnetism and excellent optical properties have been productively synthesized through a straightforward, efficient and cost-efficient hydrothermal reduction route using Fe3+ as sole metal precursor acquired from accumulated iron ore tailings-a mining waste that usually represents a major environmental threat. Fe3O4/C nanocomposites were fully elucidated by FEGSEM and TEM, revealing a combination of platelets (<1 µm) capped by particles (<10 nm) and magnetite which was verified by XPS, which demonstrated also oxygen deficiency. A dextrose/gluconic acid coating was elucidated by Fourier transform-infrared (FT-IR) spectroscopy and thermogravimetric analysis (TGA). The Fe3O4/C nanocomposites were found to be superparamagnetic at room temperature. Meanwhile, their optical properties were investigated by UV-visible diffuse reflectance spectroscopy (UV-vis DRS) and photoluminescence (PL) spectroscopy; an Eg of 1.86 eV was determined, and emissions at 612 and 650 nm (ex. 250 nm) were consistent with the XPS identification of oxygen vacancies. The efficacy of the as-synthesized magnetically recoverable magnetite/carbon (Fe3O4/C) nanocomposites has been exhibited in the photocatalytic degradation of the toxic textile (industrial) dye bodactive red BNC-BS.

A reusable catalyst based on CuO hexapods and a CuO-Ag composite for the highly efficient reduction of nitrophenols.

The enormous and urgent need to explore cost-effective catalysts with high efficiency has always been at the forefront of environmental protection and remediation research. This work develops a novel strategy for the fabrication of reusable CuO-based non-noble metal nanomaterials as high-efficiency catalysts. We report a facile and eco-friendly synthesis of CuO hexapods and CuO-Ag composite using uric acid as a reductant and protectant. Both exhibited high catalytic activity in the hydrogenation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) by sodium borohydride (NaBH4), with the CuO-Ag composite showing superior catalytic performance. Notably, the highest turnover frequency of CuO-Ag reached 7.97 × 10-2 s-1, which was much higher than numerous noble-metal nanomaterials. In addition, CuO hexapods and CuO-Ag composite were also shown to act as highly efficient and recyclable catalysts in the degeneration of 4-NP. Both CuO hexapods and the CuO-Ag composite exhibited outstanding catalytic durability, with no significant loss of activity over more than 10 cycles in the hydrogenation of 4-NP.

Shaping the Future of Fuel: Monolithic Metal-Organic Frameworks for High-Density Gas Storage.

The environmental benefits of cleaner, gaseous fuels such as natural gas and hydrogen are widely reported. Yet, practical usage of these fuels is inhibited by current gas storage technology. Here, we discuss the wide-ranging potential of gas-fuels to revolutionize the energy sector and introduce the limitations of current storage technology that prevent this transition from taking place. The practical capabilities of adsorptive gas storage using porous, crystalline metal-organic frameworks (MOFs) are examined with regard to recent benchmark results and ultimate storage targets in this field. In particular, the industrial limitations of typically powdered MOFs are discussed while recent breakthroughs in MOF processing are highlighted. We offer our perspective on the future of practical, rather than purely academic, MOF developments in the increasingly critical field of environmental fuel storage.

Lipshutz-type bis(amido)argentates for directed ortho argentation.

Bis(amido)argentate (TMP)2Ag(CN)Li2 (3, TMP-Ag-ate; TMP = 2,2,6,6-tetramethylpiperidido) was designed as a tool for chemoselective aromatic functionalization via unprecedented directed ortho argentation (DoAg). X-Ray crystallographic analysis showed that 3 takes a structure analogous to that of the corresponding Lipshutz cuprate. DoAg with this TMP-Ag-ate afforded multifunctional aromatics in high yields in processes that exhibited high chemoselectivity and compatibility with a wide range of functional groups. These included organometallics- and transition metal-susceptible substituents such as methyl ester, aldehyde, vinyl, iodo, (trifluoromethanesulfonyl)oxy and nitro groups. The arylargentates displayed good reactivity with various electrophiles. Chalcogen (S, Se, and Te) installation and azo coupling reactions also proceeded efficiently.

A new route for the efficient metalation of unfunctionalized aromatics.

The synthesis and isolation of a novel bimetallic species formed by reacting two equivalents of TMPLi with CuCl in the presence of Et2O are reported. X-ray crystallography reveals the Et2O-free tetranuclear aggregate (TMPCu)2(TMPLi)2 1, which formally results from the catenation of dimers of TMPLi and TMPCu. NMR spectroscopy confirms that, upon dissolution in hydrocarbon media, the crystals fail to form a conventional Gilman cuprate dimer. Instead they exhibit a spectrum which is consistent with that recently proposed for an isomer of dimeric Gilman cuprate. Moreover, while pre-isolated Gilman cuprate is inert to benzene solvent, this new isomer smoothly affects aromatic deprotonation to give mainly Ph(TMP)3Cu2Li2 3, which is formally a heterodimer of Gilman cuprate TMPCu(µ-TMP)Li 2 and PhCu(µ-TMP)Li 4. Attempts to synthesise 3 through explicit combination of pre-isolated 2 and 4 were successful; additionally, this permitted the preparation of Ph(TMP)3Cu3Li 5 and Ph(TMP)3CuLi3 7 when 4 was combined in 1 : 2 ratios with TMPCu or TMPLi, respectively. 5 was characterised as metallacyclic in the solid-state, its structural features resembling those in 3 but with reduced Li-π interactions. It also proved possible to perform Cu/Li exchange on 5 (using t BuOCu) to give a novel mixed organo(amido)copper species Ph(TMP)3Cu4 6. Remarkably, the unprecedented reactivity of 1 towards benzene is reproduced by heating a 1 : 1 mixture of TMPLi and TMPCu in the same solvent; this gives predominantly 3. On the other hand, mixtures which are rich in either Cu or Li can lead to the selective in situ formation of 5 or 7. Though crystallographic data on 7 could not be obtained, DFT calculations accurately corroborated the observed structures of 3 and 5 and could be used to support 7 having the same structure type, albeit with enhanced Li-π interactions. This was consistent with NMR spectroscopic data. However, in contrast to 3 and 5, for which 2D NMR spectroscopy indicated only conformational changes, 7 was additionally found to exhibit fluxionality in a manner consistent with a dissociative process.

A simple one-step synthetic route to access a range of metal-doped polyoxovanadate clusters.

VO(OiPr)3 is a useful precursor for the synthesis of a range of metal-doped polyoxovanadate (POV) cage compounds, its reactions with hydrated metal salts providing a route to arrangements containing Bi and other main group metals, transition metals and lanthanides. The new POV compounds [Bi2(DMSO)6V12O33Br]2[M(DMSO)6] (2Br-M, M = CoII, NiII, CuII, ZnII) [Bi2(DMSO)6V12O33Cl]2[Ca(DMSO)x]·yDMSO (2Cl-Ca), [Bi2(DMSO)6V12O33Cl]2[LnCl(DMSO)7] (2Cl-Ln, Ln = LaIII, CeIII, EuIII), [Bi2(DMSO)6V10O28F2]3[Bi(DMSO)5]2 (3), [V12O32(DMSO)][Gd(NO3)(DMSO)5.5]2 (4) and [Ln(DMSO)4V12O32Cl][LnCl(DMSO)7] (5Cl-Ln, Ln = CeIII, EuIII) have been structurally characterised, and their properties studied using UV-Vis spectroscopy and cyclic voltammetry. Drop-casting these compounds onto fluorine-doped tin oxide followed by calcination provides a simple approach to thin films of metal-doped BiVO4 or LnVO4, depending on the composition of the cage precursor. The applications of the BiVO4 films as photoanodes for water oxidation is explored, with transition metal doping of BiVO4 improving the activity (∼1.8-2.4 times the photocurrent density of undoped BiVO4 at 1.23 V vs. RHE) while lanthanide or Ca-doping is detrimental.

Comprehensive Experimental and Theoretical Study of the CO + NO Reaction Catalyzed by Au/Ni Nanoparticles.

The catalytic and structural properties of five different nanoparticle catalysts with varying Au/Ni composition were studied by six different methods, including in situ X-ray absorption spectroscopy and density functional theory (DFT) calculations. The as-prepared materials contained substantial amounts of residual capping agent arising from the commonly used synthetic procedure. Thorough removal of this material by oxidation was essential for the acquisition of valid catalytic data. All catalysts were highly selective toward N2 formation, with 50-50 Au:Ni material being best of all. In situ X-ray absorption near edge structure spectroscopy showed that although Au acted to moderate the oxidation state of Ni, there was no clear correlation between catalytic activity and nickel oxidation state. However, in situ extended X-ray absorption fine structure spectroscopy showed a good correlation between Au-Ni coordination number (highest for Ni50Au50) and catalytic activity. Importantly, these measurements also demonstrated substantial and reversible Au/Ni intermixing as a function of temperature between 550 °C (reaction temperature) and 150 °C, underlining the importance of in situ methods to the correct interpretation of reaction data. DFT calculations on smooth, stepped, monometallic and bimetallic surfaces showed that N + N recombination rather than NO dissociation was always rate-determining and that the activation barrier to recombination reaction decreased with increased Au content, thus accounting for the experimental observations. Across the entire composition range, the oxidation state of Ni did not correlate with activity, in disagreement with earlier work, and theory showed that NiO itself should be catalytically inert. Au-Ni interactions were of paramount importance in promoting N + N recombination, the rate-limiting step.

Single-Source Bismuth (Transition Metal) Polyoxovanadate Precursors for the Scalable Synthesis of Doped BiVO4 Photoanodes.

Single-source precursors are used to produce nanostructured BiVO4 photoanodes for water oxidation in a straightforward and scalable drop-casting synthetic process. Polyoxometallate precursors, which contain both Bi and V, are produced in a one-step reaction from commercially available starting materials. Simple annealing of the molecular precursor produces nanocrystalline BiVO4 films. The precursor can be designed to incorporate a third metal (Co, Ni, Cu, or Zn), enabling the direct formation of doped BiVO4 films. In particular, the Co- and Zn-doped photoanodes show promise for photoelectrochemical water oxidation, with photocurrent densities >1 mA cm-2 at 1.23 V vs reversible hydrogen electrode (RHE). Using this simple synthetic process, a 300 cm2 Co-BiVO4 photoanode is produced, which generates a photocurrent of up to 67 mA at 1.23 V vs RHE and demonstrates the scalability of this approach.

Author Correction: N-Alkylation of functionalized amines with alcohols using a copper-gold mixed photocatalytic system.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

N-Alkylation of functionalized amines with alcohols using a copper-gold mixed photocatalytic system.

Direct functionalization of amino groups in complex organic molecules is one of the most important key technologies in modern organic synthesis, especially in the synthesis of bio-active chemicals and pharmaceuticals. Whereas numerous chemical reactions of amines have been developed to date, a selective, practical method for functionalizing complex amines is still highly demanded. Here we report the first late-stage N-alkylation of pharmaceutically relevant amines with alcohols at ambient temperature. This reaction was achieved by devising a mixed heterogeneous photocatalyst in situ prepared from Cu/TiO2 and Au/TiO2. The mixed photocatalytic system enabled the rapid N-alkylation of pharmaceutically relevant molecules, the selective mono- and di-alkylation of primary amines, and the non-symmetrical dialkylation of primary amines to hetero-substituted tertiary amines.

Metal exchange in lithiocuprates: implications for our understanding of structure and reactivity.

New reagents have been sought for directed ortho cupration in which the use of cyanide reagents is eliminated. CuOCN reacts with excess TMPLi (TMP = 2,2,6,6-tetramethylpiperidide) in the presence of limited donor solvent to give crystals that are best represented as (TMP)2Cu0.1Li0.9(OCN)Li2(THF) 8, whereby both Lipshutz-type lithiocuprate (TMP)2Cu(OCN)Li2(THF) 8a and trinuclear (TMP)2(OCN)Li3(THF) 8b are expressed. Treatment of a hydrocarbon solution of TMP2CuLi 9a with LiOCN and THF gives pure 8a. Meanwhile, formation of 8b is systematized by reacting (TMPH2)OCN 10 with TMPH and nBuLi to give (TMP)2(OCN)Li3(THF)211. Important to the attribution of lower/higher order bonding in lithiocuprate chemistry is the observation that in crystalline 8, amide-bridging Cu and Li demonstrate clear preferences for di- and tricoordination, respectively. A large excess of Lewis base gives an 8-membered metallacycle that retains metal disorder and analyses as (TMP)2Cu1.35Li0.659 in the solid state. NMR spectroscopy identifies 9 as a mixture of (TMP)2CuLi 9a and other copper-rich species. Crystals from which the structure of 8 was obtained dissolve to yield evidence for 8b coexisting in solution with in situ-generated 9a, 11 and a kinetic variant on 9a ( i-9a), that is best viewed as an agglomerate of TMPLi and TMPCu. Moving to the use of DALi (DA = diisopropylamide), (DA)2Cu0.09Li0.91(Br)Li2(TMEDA)212 (TMEDA = N,N,N',N'-tetremethylethylenediamine) is isolated, wherein (DA)2Cu(Br)Li2(TMEDA)212a exhibits lower-order Cu coordination. The preparation of (DA)2Li(Br)Li2(TMEDA)212b was systematized using (DAH2)Br, DAH and nBuLi. Lastly, metal disorder is avoided in the 2 : 1 lithium amide : Lipshutz-type monomer adduct (DA)4Cu(OCN)Li4(TMEDA)213.

Reactions of Trimethylaluminium: Modelling the Chemical Degradation of Synthetic Lubricants.

In investigating and seeking to mimic the reactivity of trimethylaluminium (TMA) with synthetic, ester-based lubricating oils, the reaction of methyl propionate 1 was explored with 1, 2 and 3 equivalents of the organoaluminium reagent. Spectroscopic analysis points to the formation of the adduct 1(TMA) accompanied only by the low level 1:1 production of Me2 AlOCEtMe2 2 and Me2 AlOMe 3 when an equimolar amount of TMA is applied. The deployment of excess TMA favours reaction to give 2 and 3 over 1(TMA) adduct formation and spectroscopy reveals that in hydrocarbon solution substitution product 2 traps unreacted TMA to yield 2(TMA). The 1 H NMR spectroscopic observation of two Al-Me signals not attributable to free TMA and in the ratio 1:4 suggests the formation of a previously only postulated, symmetrical metallacycle in Me4 Al2 (µ2 -Me)(µ2 -OCEtMe2 ). In the presence of 3, 2(TMA) undergoes thermally induced exchange to yield Me4 Al2 (µ2 -OMe)(µ2 -OCEtMe2 ) 4 and TMA. The reaction of methyl phenylacetate 5 with TMA allows isolation of the crystalline product Me2 AlOCBnMe2 (TMA) 6(TMA), which allows the first observation of the Me4 Al2 (µ2 -Me)(µ2 -OR) motif in the solid state. Distances of 2.133(3) Š(Al-Mebridging ) and 1.951 Š(mean Al-Meterminal ) are recorded. The abstraction of TMA from 6(TMA) by the introduction of Et2 O has yielded 6, which exists as a dimer.

Facile synthesis of SnO2-PbS nanocomposites with controlled structure for applications in photocatalysis.

Recent studies have shown that SnO2-based nanocomposites offer excellent electrical, optical, and electrochemical properties. In this article, we present the facile and cost-effective fabrication, characterization and testing of a new SnO2-PbS nanocomposite photocatalyst designed to overcome low photocatalytic efficiency brought about by electron-hole recombination and narrow photoresponse range. The structure is fully elucidated by X-ray diffraction (XRD)/Reitveld refinement, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) surface area analysis, and transmission electron microscopy (TEM). Energy-dispersive X-ray spectroscopy (EDX) spectrum imaging analysis demonstrates the intermixing of SnO2 and PbS to form nanocomposites. A charge separation mechanism is presented that explains how the two semiconductors in junction function synergistically. The efficacy of this new nanocomposite material in the photocatalytic degradation of the toxic dye Rhodamine B under simulated solar irradiation is demonstrated. An apparent quantum yield of 0.217 mol min(-1) W(-1) is calculated with data revealing good catalyst recyclability and that charge separation in SnO2-PbS leads to significantly enhanced photocatalytic activity in comparison to either SnO2 or PbS.

Extending motifs in lithiocuprate chemistry: unexpected structural diversity in thiocyanate complexes.

The new area of lithio(thiocyanato)cuprates has been developed. Using inexpensive, stable and safe CuSCN for their preparation, these complexes revealed Lipshutz-type dimeric motifs with solvent-dependent point group identities; planar, boat-shaped and chair shaped conformers are seen in the solid state. In solution, both Lipshutz-type and Gilman structures are clearly seen. Since the advent in 2007 of directed ortho cupration, effort has gone into understanding the structure-reactivity effects of amide ligand variation in and alkali metal salt abstraction from Lipshutz-type cuprates such as (TMP)2Cu(CN)Li2(THF) 1 (TMP = 2,2,6,6-tetramethylpiperidide). The replacement of CN(-) with SCN(-) is investigated presently as a means of improving the safety of lithium cuprates. The synthesis and solid state structural characterization of reference cuprate (TMP)2Cu(CN)Li2(THP) 8 (THP = tetrahydropyran) precedes that of the thiocyanate series (TMP)2Cu(SCN)Li2(L) (L = OEt29, THF 10, THP 11). For each of 9-11, preformed TMPLi was combined with CuSCN (2 : 1) in the presence of sub-stoichiometric Lewis base (0.5 eq. wrt Li). The avoidance of Lewis basic solvents incurs formation of the unsolvated Gilman cuprate (TMP)2CuLi 12, whilst multidimensional NMR spectroscopy has evidenced the abstraction of LiSCN from 9-11 in hydrocarbon solution and the in situ formation of Gilman reagents. The synthetic utility of 10 is established in the selective deprotometalation of chloropyridine substrates, including effecting transition metal-free homocoupling in 51-69% yield.

Multicomponent signal unmixing from nanoheterostructures: overcoming the traditional challenges of nanoscale X-ray analysis via machine learning.

The chemical composition of core-shell nanoparticle clusters have been determined through principal component analysis (PCA) and independent component analysis (ICA) of an energy-dispersive X-ray (EDX) spectrum image (SI) acquired in a scanning transmission electron microscope (STEM). The method blindly decomposes the SI into three components, which are found to accurately represent the isolated and unmixed X-ray signals originating from the supporting carbon film, the shell, and the bimetallic core. The composition of the latter is verified by and is in excellent agreement with the separate quantification of bare bimetallic seed nanoparticles.

Shape-defined nanodimers by tailored heterometallic epitaxy.

The systematic construction of heterogeneous nanoparticles composed of two distinct metal domains (Au and Pt) and exhibiting a broad range of morphologically defined shapes is reported. It is demonstrated that careful Au overgrowth on Pt nanocrystal seeds with shapes mainly corresponding to cubeoctahedra, octahedra and octapods can lead to heterometallic systems whose intrinsic structures result from specific epitaxial relationships such as {111} + {111}, {200} + {200} and {220} + {220}. Comprehensive analysis shows also that nanoparticles grown from octahedral seeds can be seen as comprising of four Au tetrahedral subunits and one Pt octahedral unit in a cyclic arrangement that is similar to the corresponding one in decahedral gold nanoparticles. However, in the present case, the multi-component system is characterized by a broken five-fold rotational symmetry about the [011] axis. This set of bimetallic dimers could provide new platforms for fuel cell catalysts and plasmonic devices.

New avenues in the directed deprotometallation of aromatics: recent advances in directed cupration.

Recent advances in the selective deprotometallation of aromatic reagents using alkali metal cuprates are reported. The ability of these synergic bases to effect deprotonation under the influence of a directing group is explored in the context of achieving new and more efficient organic transformations whilst encouraging greater ancillary group tolerance by the base. Developments in our understanding of the structural chemistry of alkali metal cuprates are reported, with both Gilman cuprates of the type R2CuLi and Lipshutz and related cuprates of the type R2Cu(X)Li2 (X = inorganic anion) elucidated and rationalised in terms of ligand sterics. The generation of new types of cuprate motif are introduced through the development of adducts between different classes of cuprate. The use of DFT methods to interrogate the mechanistic pathways towards deprotonative metallation is described. Theoretical modelling of in situ rearrangements undergone by the cuprate base are discussed, with a view to understanding the relationship between R2CuLi and R2Cu(X)Li2, their interconversion and the implications of this for cuprate reactivity. The advent of a new class of adduct between different cuprate types is developed and interpreted in terms of the options for expelling LiX from R2Cu(X)Li2. Applications in the field of medicinal chemistry and (hetero)arene derivatization are explored.